For welding of carbon steel, especially for the thin
plate steel with short discontinuous weld and requirement of smooth welding
pass. Can for all welding position. Rutile type coating.
For welding of Rm 430 MPa level’s low carbon steel,
especially for the thin plate steel’s short discontinuous and vertical-down
welding. Can be for all welding position. Rutile coating.
Mainly used in outdoor welding of steel pipe with
corresponding strength grade, or shipbuilding, bridges, etc. Especially for
vertical-down welding, Cellulose sodium type coating.
Mainly used in outdoor welding of steel pipe with
corresponding strength grade, or shipbuilding, bridges, etc. Especially for
vertical-down welding, Cellulose potassium type coating.
For welding of SUS304L
stainless steel, also can be used for SUS321 and other corrosion resistant
stainless steel structure. All position and AC/DC is suitable. Rutile type
coating.
Mainly used in the welding for SUS316L stainless
steel of urea tower, petrochemical equipment and other equipment. All position
and AC/DC is suitable. Rutile type coating.
For welding of the working temperature is less
than 300℃’s corrosion resistant stainless steel
structure, such as SUS304 etc. All position and AC/DC is suitable. Rutile type
coating.
For the thin or machined surface cast’s repair
welding, such as cylinder cover, engine bearer, gear box, machine tool guide.
Graphite type coating and pure-Ni cast iron electrode.
For the high strength gray cast iron and nodular cast
iron’s repair welding, such as cylinder, engine bearer, gear box. Graphite type
coating and Ni-alloy cast iron electrode.
Applying for the welding of RM 500MPa level carbon
steel such as shipbuilding and offshore platform etc. Especially for the
welding of steel plates be painted at bottom layer by rich inorganic zinc paint
With suitable wires (such as EM12 or EH14 etc.) for
single-pass and multi-pass SAW welding of low carbon and low alloy steel
structure with good Kv impact value and lower
cracking sensibility
With suitable wires (such as EL12 or EM12 etc.) for
single-pass and multi-pass SAW welding of low carbon and low alloy steel
structure. Can be used welding steel that have little rusty or dirty surface,
especially for girth welding of small pipeline.
With suitable wires (such as EL8 or EM12) for
single-pass and multi-pass SAW welding of low carbon and low alloy steel
structure, especially for pipeline steel sheet higher speed welding.
For the single-pass and multi-pass welding of grade Rm
500MPa level’s steel structure, especially for railway rolling stock. Lower
spatter and smooth welding pass.
For the single-pass and multi-pass welding of grade Rm
500MPa level’s steel structure, especially for railway rolling stock. Good gas
pore resistance and smooth welding pass.